Home Movie Recovery

Getting your damaged films to a Lab

For a list of film labs closest to the area affected by Hurricane Katrina that offer rewashing services - click here.

To search for film labs Worldwide, go here.

Driving: When films need to be kept wet, labs within driving distance should be consulted first. If there are no appropriate labs nearby, discuss with the lab of your choice the best means of transporting the film to them.

Shipping: Use overnight express: If films are not being transported by hand, they should be shipped by overnight express so that they spend as little time possible in transit, where they will be subject to high temperatures and drying.

FedEx: Submerged films may be shipped by FedEx if you take care to pack them so that no water can leak out of the package. Speak to your FedEx representative and follow their instructions.

FedEx will ask you to pack the submerged films about like this: First place the films in a container with a tight-fitting lid, such as a Tupperware container, filled with water to keep the films wet in transit. Place this container inside a plastic bag and seal the bag. Place the first bag inside a second bag and seal the second bag. Place the double-bagged container in a waterproof receptacle, such as an ice chest. Add packing materials such as plastic bags or Styrofoam to the ice chest so that the film is packed in tightly. Snug packing will help prevent the film reels from moving around excessively during shipping (remember, the wet films are fragile) and will decrease the chances of the plastic bags moving around and possibly springing a leak. Seal the ice chest with duct tape. If the ice chest locks securely, you can wrap some packing tape around it to secure it and FedEx can ship it as is. If the ice chest doesn't lock, put it inside a cardboard box that can be secured with packing tape.

Keeping records of shipped films: When you get ready to send your films to a lab, be sure to keep detailed records of the films you are sending. The most important thing is to link the information on the film containers with the films themselves. Otherwise it may be hard to identify the contents of the films later on. Here's how:

1. Give each film box, can or reel an identifying number with an indelible pen (and permanent adhesive tape if the pen doesn't write directly on the container). Or write the number on the film leader. If a film box falls apart while underwater, the identification number will need to be transferred to the film reel or leader before shipping the film to a lab.

2. Manually copy all of the information written on the film box or can to a paper list. Include dates, names, places and all other information about the contents of the film. Write the same ID number you have written on the film box or reel by the information about that reel.

3. Or, instead of copying by hand the writing on the film box or can, take a digital or traditional photo of the box or can. Be sure that the photo includes the ID number you have written on the film container and any notes (dates, names, places, etc.) that could help identify the contents of the film.

4. Most ballpoint or felt tip pens that would have been used in the past to write on film cans or boxes will only withstand water immersion for a short period of time. Because of this, an organized identification system is essential.

September 19, 2005 in Labs | Permalink | Comments (0)

Film Labs

The following film labs have the facilities to rewash film that has been flooded or otherwise contaminated by disaster conditions. Always call the lab first before sending any material.

Bono Film and Video
Arlington, VA
(703) 243-0800
www.bonofilm.com
8mm, Super-8mm, 16mm and 35mm.

Cineworks Digital Studios
Miami, FL
(305) 754-7501
www.cineworks.com
16mm and 35mm.

Colorlab
Rockville, MD
(301) 770-2128
www.Colorlab.com
8mm, Super-8mm, 16mm and 35mm.

Continental Film Lab
North Miami, FL
(305) 949-4252
www.flfilmlab.com
16mm and 35mm.

Continental Film Lab
Orlando, FL
(407) 856-8958
flfilmlab.com
16mm and 35mm. Negative only.

Filmworkers Club
Dallas, TX
(214) 754-9333
Chicago, IL
(312) 664-9333
www.filmworkers.com
Contact: Glen Shenk (Dallas)
Contact: Manuela Hung (Chicago)
16mm and 35mm only.
Flexible pricing for rewashing damaged films.

Javaphoto.com
Athens, GA
(706) 354-0988
www.javaphoto.com
8mm, Super-8mm and 16mm.
Contact: Rick Hawkins

September 19, 2005 in Labs | Permalink | Comments (0)

Categories

  • Film Damage Recovery
  • Labs
  • Video Damage Recovery

Other Links

Film Forever
Home Movie Day

Recent Posts

  • DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • FAQ On Film Water Damage
  • Getting your damaged films to a Lab
  • Film Labs
  • Salvaging Flooded Videotapes

Recent Comments

  • p90x sale on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • WigobeFloalia on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • dissertation proposal on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • fluowldadoGed on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • irrewayHive on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • vemycheency on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • Stobiazooff on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • tuttydayfef on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • Prewpoopoms on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS
  • Malspiviap on DISASTER RECOVERY FOR FILMS IN FLOODED AREAS

Archives

  • September 2005
Powered by TypePad